User guide

If you set your system to automatic answering, the endpoint answers after the predefined
n
umber of rings.
If you set your system to manual answering, you can either accept or reject the incoming call.
When there is an incoming call, the system displays a window with these options:
•
To accept the call, press
Accept or on the XT Remote Control Unit.
•
To reject the call, select the Reject option on the screen by pressing the right arrow key
and on the XT Remote Control Unit.
•
T
o reject the call and set the system to automatically reject all further incoming calls
without asking any more, select the Do not disturb option on the screen by pressing the
right arrow key twice and
on the XT Remote Control Unit.
F
or information about setting the system to answering calls automatically, see “Enabling
Automatic Answering” on page 19.
Ending a Call
Procedure
S
tep 1
Press
on the XT Remote Control Unit.
S
tep 2
Press
to confirm, if your system is set to C
onfirm disconnection.
RADVISION | User Guide for SCOPIA XT4000 Series Version 3.0 Making Calls | 32