User guide

Figure 3-8 Setting the XT Remote Control Unit Code

Step 3

nter the code in the Remote control code field.

Step 4

Select Save.

Step 5

On the XT Remote Control Unit, press

and simultaneously.

he On/Off key on the XT Remote Control Unit turns red.

Step 6

Using the keypad, type the number you just entered in the Remote control code field.

Note

ou must always use two digits for a code. For example, to set the code to “1”,

enter “01”.

The code of the XT Remote Control Unit is changed and the Remote Control icon and the

ew Remote Control code appear at the top of the screen.

Restoring Default User Settings

You can change the default settings of the system to adapt them to your work requirements.

his procedure explains how to restore the default settings if necessary. You can restore the

default settings at any time.

Procedure

Step 1

Access the SCOPIA XT Series web interface.

Step 2

Select the User Settings tab.

Step 3

Select Load default values.

Step 4

Select General.

Step 5

Select the Restore default button.

The default settings are restored.

RADVISION | User Guide for SCOPIA XT4000 Series Version 3.0 Getting Started | 17