User guide

Figure 3-4 Adjusting the image position

Step 3

se the arrow keys on the XT Remote Control Unit to position the image, and then press OK.

Step 4

Press 2 to align the bottom right corner.

Step 5

Use the arrow keys on the XT Remote Control Unit to position the image, and then press OK.

Step 6

Select Next.

Configuring Network Settings

This page allows you to setup the GLAN1 settings and the IP address the system uses for

placing a call.

Consult with your network administrator to configure these fields.

Before you begin

This procedure is performed as part of the basic configuration after “Adjusting the Image

Position” on page 11.

Procedure

Step 1

Press and scroll to Y

es from the Automatic IP address list.

RADVISION | User Guide for SCOPIA XT4000 Series Version 3.0 Getting Started | 12