User guide
Setting the System Name and Language-related Settings
This page allows you to select the name of your XT Codec Unit. The name is displayed on the
m
onitors participating in the videoconference call (for example: Hong-Kong, or 9th-Floor-
Room, or NY-Office). You can also configure the fields required for setting up calls.
You can also select the country in which the system is located and the language in which the
system menus are displayed.
Before you begin
Turn on the SCOPIA XT Series unit to start the quick setup wizard.
or
If the quick setup wizard is not displayed automatically, in the Main menu page select
Configure > Quick Setup.
Procedure
Step 1
Enter the name of the SCOPIA XT Series in the System name field using the alphanumeric keys
of the XT Remote Control Unit.
By default you can enter letters before you can enter digits. To change the input method
press
.
Figure 3-2 Setting Country and Language
Step 2
S
elect the required country from the Country list using the arrow keys and press
.
T
he system menu and the Language field automatically change to the language used in the
selected country.
RADVISION | User Guide for SCOPIA XT4000 Series Version 3.0 Getting Started | 10