System information

Field Name Description
SNMP management Enables/disables SNMP use.
Administrator name Enter the name of the administrator in charge of managing the
SCOPIA XT Series using SNMP.
Location Enter the SCOPIA XT Series location.
Community Enter the name of the SNMP community that will support the read
and write operations of SNMP management. SCOPIA iVIEW
Management Suite requires the name to communicate with the
gateway in the SNMP Get/Set Community fields. “private” is the
default community for Edit. “public” is the default community for
Read.
Note
The community values are case-sensitive.
Enable all addresses If set to Yes, allows editing/reading of settings by any IP address on
a specified network. If set to No, configure Address and SubNet
mask.
Address Limits editing/reading of settings to one IP address on a specified
network.
SubNet mask Enter the SubNet mask associated with the IP address.
Step 4
Select Save.
Enabling Backup and Restore of SCOPIA XT Series Configuration Files from SCOPIA iVIEW
Management Suite
SCOPIA iVIEW Management Suite can remotely backup and restore endpoint configurations,
including those from the SCOPIA XT Series. The remote use of configuration files can also be
used to duplicate the same settings across multiple endpoints in an organization.
This procedure configures the XT Series to allow iVIEW Management Suite to retrieve or apply
configuration files remotely.
Procedure
Step 1
Access the SCOPIA XT Series web interface.
Step 2
In the Administrator settings tab, select Utilities > Remote Access > Advanced.
RADVISION | Administrator Guide for SCOPIA XT4000 Series Version 3.0 Maintenance Tasks | 23