Installation guide

The SCOPIA XT Series provides video technology for room conferencing, including support for
dual stream 1080p video, high quality data sharing, high quality full band audio and a high
capacity embedded MCU.
This section details the ports used for the SCOPIA XT Series and the relevant configuration
procedures:
•
Ports to Open on the SCOPIA XT Series.................................................. page 80
•
Configuring Port Ranges on the SCOPIA XT Series...................................... page 83
Ports to Open on the SCOPIA XT Series
The SCOPIA XT Series is typically located in the enterprise network and is connected to the
DMZ. When opening ports to and from the SCOPIA XT Series, use the following as a reference:
•
If you are opening ports that are both to and from the SCOPIA XT Series, see Table 6-1 on
page 81.
•
If you are opening outbound ports from the SCOPIA XT Series, see Table 6-2 on page 83.
Note
The specific firewalls you need to open ports on depends on where your SCOPIA XT Series and
other SCOPIA Solution products are deployed.
6
Implementing Port Security for the SCOPIA XT Series
RADVISION | Installation Guide for SCOPIA XT4000 Series Version 3.0 Implementing Port Security for the SCOPIA XT Series | 80