Installation guide

Table 5-22 Configuring general call settings
Field Name Description
<auto> This is the default setting. It indicates that the system tries to
choose the settings that best suit the local situation.
Rate K (IP) Sets the maximum call rate that the system uses for all
incoming or outgoing calls.
Audio Coding (IP) Sets the preferred Audio Coding that the system tries to use
for all incoming or outgoing calls, if the remote system
supports the same Audio Coding.
Video Coding (IP) Sets the preferred Video Coding that the system tries to use
for all incoming or outgoing calls, if the remote system
supports the same Video Coding.
Rate K (ISDN) Sets the maximum call rate that the system uses for all
incoming or outgoing calls in ISDN connectivity. Currently this
setting is not relevant: the ISDN functionality will be
incorporated in the next version of the product.
DualVideoCoding (IP) Sets the resolution for H.264 content video.
Use manual DualVideo
bandwidth (IP)
If set to Yes allows to change bandwidth used for content and
live video (DualVideo/Live bandwidth).
DualVideo/Live bandwidth
(IP)
Sets more bandwidth on Live Video or Content.
Step 8
Select Save.
Step 9
Select IP under Preferences.
Step 10
Set the fields as described in Table 5-23 on page 76.
RADVISION | Installation Guide for SCOPIA XT4000 Series Version 3.0 Initial Configuration | 75