Installation guide

Configuring Call Settings
This procedure shows how to configure the system for support of incoming and outgoing calls.
To configure the call settings remotely, access the SCOPIA XT Series web interface and
navigate to Settings > Calls > Preferences > General and to Settings > Calls > Preferences >
IP.
Procedure
Step 1
Access the SCOPIA XT Series web interface.
Step 2
In the Administrator Settingstab, select Networks > Preferences > General.
Figure 5-29 Configuring the Priority setting
Step 3
Set the Priority setting to the GLAN port that the preferred network uses. This field specifies
in which order the system places outgoing calls.
Step 4
Select Save.
Step 5
Select Calls.
Step 6
Select General under Preferences.
RADVISION | Installation Guide for SCOPIA XT4000 Series Version 3.0 Initial Configuration | 73