Installation guide

Table 5-21 Configuring LDAP server settings
Field Name Description
Type Allows to define the LDAP server.
Address Indicates the LDAP server address.
Port Indicates the port used to connect to the LDAP server.
User The username and password with access to the information required in the
remote LDAP server. The format of the username is in the form of a
Distinguished Name (DN).
The LDAP user of a XT Series is predefined, so when pointing to an XT Series
this value cannot be edited.
Some standard components of DN are: domain controller (dc), organizational
unit (ou), common name (cn), country (c), state or province (st), locality (l),
organization (o).
Password The User’s password to authenticate with the server.
Base The root of the LDAP tree where the contacts’ records are defined. This value
is predefined when the LDAP server is an XT Series.
Filter The phrase required to navigate the remote LDAP tree, which depends on the
way the tree was structured. For example, if the LDAP tree is built from
objects known as inetOrgPerson, the filter would be
objectclass=inetOrgPerson. This value is predefined when the LDAP
server is an XT Series.
Step 5
Select Save.
Step 6
In deployments using iVIEW Management Suite version 7.5 or upgraded to version 7.6, do the
following in the iVIEW Network Manager web interface:
1. Navigate to the endpoint in the network tree and select the Configure tab.
2. Change the objectClass filter in the Search filter field of the Corporate Directory
Settings area to (&(objectClass=inetOrgPerson)(objectClass=commURIObject)).
3. Select Upload.
Configuring Call Properties
When configuring the settings the system will use for in-call transmission, take into account
the remote terminal capabilities.
•
Configuring Call Settings................................................................... page 73
•
Configuring Audio Compatibility with Older Systems .................................. page 76
•
Configuring Video Compatibility with Older Systems .................................. page 77
RADVISION | Installation Guide for SCOPIA XT4000 Series Version 3.0 Initial Configuration | 72