Manualshelf

Installation guide

ManualsBrandsRADVision ManualsBusiness equipmentSCOPIA XT4000 Series
71727374757677787980
Table 5-20 Configuring SIP-related parameters
Parameter Description
User Enter the system user name (alias). The
system is registered to the SIP Registrar under
this name.
Authentication Name If necessary, enter the name for
authenticating the XT Series with the SIP
Proxy server and SIP Registrar. It can be the
same as the User parameter.
Authentication Password If necessary, enter the password for
authenticating your XT Series with the SIP
Proxy server and SIP Registrar.
Listening Port Enter the number of the port used by XT
Series for receiving inbound SIP calls. By
default, port 5060 is used.
Transport Outbound Call Select the preferred transport protocol for
outbound SIP calls: TCP or UDP.
Use SIP Registrar Enable registering the system to the SIP
Registrar by selecting Yes.
Registrar DNS Name Enter the DNS name or IP address of the SIP
Registrar.
Use SIP Proxy Enable using the SIP Proxy by selecting Yes.
Proxy DNS Name Enter the DNS name or IP address of the SIP
Proxy.
Proxy Model Select the model of the SIP Proxy server.
Specifying the model can help to avoid
potential interoperability issues. If the model
is unknown or is not on the list, select Auto.
Step 4
Select Save.
Configuring the SCOPIA XT Series to use iVIEW Management Suite as LDAP Directory
You can manage the user directory of your XT Series using either an external LDAP server like
SCOPIA iVIEW Management Suite or the local built-in LDAP server. You can configure the XT
Series to use iVIEW Management Suite as the LDAP directory by configuring the LDAP settings
in one of the following interfaces:
•
XT Series endpoint
•
XT Series web interface
•
SCOPIA iVIEW Management Suite web interface
Typically your deployment would use iVIEW Management Suite as the external LDAP server
which stores the contacts. A centralized solution like iVIEW Management Suite enables
synchronizing the same list of contacts across all the endpoints in your organization, and has
RADVISION | Installation Guide for SCOPIA XT4000 Series Version 3.0 Initial Configuration | 69