Installation guide

Figure 5-24 Configuring QoS settings
Step 5
Set the fields as described in Table 5-17 on page 63.
Table 5-17 Configuring QoS settings
Field Name Description
Use QoS Enable/Disable QoS. If you set Use QoS to Yes, you will provide
different priority to different data stream, or guarantee a certain level
of performance to a data stream. In particular, you may choose
between Precedence/TOS and Differentiated Service.
Quality of service Precedence/TOS - For each stream (Audio, Video, Data, Signal) sent to
the system, you may define the Type Of Services and a Precedence to
fit network capabilities. Precedence is priority. A higher number sets a
higher priority. Used mainly to class router packets as high priority.
Differentiated Service - For each stream (Audio, Video, Data, Signal)
sent to the system, you may define a priority level to fit network
capabilities.
Step 6
Select Save.
Configuring Gatekeeper Use
Gatekeepers offer video users the ability to contact H.323 endpoints by entering an alias,
rather than having to remember each endpoint’s IP address. For example, you can dial “1234”
or “joesmith” and the gatekeeper routes the call correctly.
RADVISION | Installation Guide for SCOPIA XT4000 Series Version 3.0 Initial Configuration | 63