Installation guide

Step 8
Select Addresses under GLAN.
Figure 5-20 Configuring IP addresses
Step 9
Set the fields as described in Table 5-13 on page 57.
Table 5-13 Configuring IP addresses
Field Name Setting
MAC address This setting cannot be changed.
Automatic IP address Set to Yes (default) if the system gets its IP address automatically.
If the XT Codec Unit is connected to the Internet and you must set
up a static public IP address in the IP address field, set this field to
No; the other fields in this page become programmable.
IP address If the system gets its IP address automatically, indicates the IP
address assigned to the system. Otherwise enter the system static IP
address here.
Subnet mask If the system gets its IP address automatically, indicates the subnet
mask assigned to the system. If you entered the system’s IP address
manually, type the subnet mask.
Gateway IP address If the system gets its IP address automatically, this field indicates
the gateway IP address assigned to the system. If you entered the
system’s IP address manually, type the gateway IP address.
DNS server IP address If the system gets its IP address automatically, this field indicates
the DNS server IP address assigned to the system. If you entered the
system’s IP address manually, type the DNS server IP address.
Step 10
Select Save.
RADVISION | Installation Guide for SCOPIA XT4000 Series Version 3.0 Initial Configuration | 57