Installation guide

Step 3
Set the fields as required.
Table 5-12 Configuring audio output settings
Field Name Description
Digital Audio to output If enabled, it routes the digital audio input port to
one or more of the system’s audio output
channels: HD1, digital audio and digital analog or
all of the above.
Echo Cancelled inputs to output If enabled, sends the echo cancelled input from
the microphones to one of the system’s audio
output channels: HD1, digital audio or analog
output.
This setting is disabled by default, to avoid echo
effects and feedback loops when a monitor
speaker is used.
Rx remote to output If enabled, sends the remote audio of other
conference participants to one or more of the
system’s audio output channels: HD1, digital audio
or analog output.
Analog to output If enabled, it routes the analog input port to one
or more of the system’s audio output channels:
HD1, digital audio or analog output.
Step 4
Select Save.
Configuring Network Settings
Part of the initial configuration is ensuring the network is properly set up. The settings are
detailed in these sections:
•
Configuring GLAN Use...................................................................... page 55
•
Configuring Gatekeeper Use.............................................................. page 63
•
Configuring SIP Server Use................................................................ page 67
•
Configuring the SCOPIA XT Series to use iVIEW Management Suite as LDAP
Directory..................................................................................... page 69
Configuring GLAN Use
You can configure GLAN use for SCOPIA XT Series.
Before you begin to configure GLAN use, you must prepare your network for video
conferencing. Consult your network administrator for more information.
These sections describe step-by-step procedures to configure settings for GLAN use:
RADVISION | Installation Guide for SCOPIA XT4000 Series Version 3.0 Initial Configuration | 55