Installation guide

Configuring the Echo Canceller

If your SCOPIA XT Series works with an external microphone system that does not contain echo

cancellation, perform this procedure to cancel echo.

Before you begin

Enable echo cancellation as described in “Configuring the Microphone Pod” on page 49.

Procedure

Step 1

Access the SCOPIA XT Series web interface.

Step 2

Select Administrator Settings.

Step 3

Select I/O connections.

Step 4

Select Echo Canceller under to Audio - Input.

Figure 5-17 Cancelling echo

Step 5

Set the fields as required.

RADVISION | Installation Guide for SCOPIA XT4000 Series Version 3.0 Initial Configuration | 52