Installation guide

Table 5-10 Configuring the Microphone Pod connection
Field Name Description
Enabled Enables/disables the Microphone Pod.
Gain Use the slider to adjust the fixed Gain Control, setting the voice signal
to the desired level. The AGC reduces the volume if the audio is
strong and raises the volume if the audio is weak.
Echo canceller Enable the echo canceller when working with an external microphone
system that does not contain echo cancellation. Disable this setting
when working with an external mixer that handles echo cancellation.
If enabled check the field settings in “Configuring the Echo Canceller”
on page 52, and configure if required.
Step 6
Select Save.
Configuring Analog Audio Connections
You must perform this procedure if you are using the analog audio connections:
Figure 5-16 The analog audio port on the XT Series
Procedure
Step 1
Access the SCOPIA XT Series web interface.
Step 2
Select the Administrator settings tab.
Step 3
Select I/O connections.
Step 4
Select Analog under Audio - Inputs.
Step 5
Set the fields as required.
RADVISION | Installation Guide for SCOPIA XT4000 Series Version 3.0 Initial Configuration | 50