Installation guide

•
Configuring Analog Audio Connections................................................... page 50
•
Configuring the Echo Canceller ........................................................... page 52
•
Configuring Audio Outputs................................................................ page 53
Configuring the Microphone Pod
The Microphone Pod puts the focus on the speaker while isolating background noise.
Procedure
Step 1
Access the SCOPIA XT Series web interface.
Step 2
Select Administrator Settings.
Step 3
Select I/O connections.
Step 4
Select POD1 under to Audio - Input.
Figure 5-15 Configuring the Microphone Pod settings
Step 5
Set the fields as described in Table 5-10 on page 50.
RADVISION | Installation Guide for SCOPIA XT4000 Series Version 3.0 Initial Configuration | 49