Installation guide

•

PaP (Picture and Picture) displays two images side-by-side on one monitor, where the

remote image and the local image have the same size, emulating a dual-monitor setup.

•

PoP (Picture out Picture) displays two images side-by-side on one monitor, where the

remote image is larger than the local image.

Procedure

Step 1

Access the SCOPIA XT Series web interface.

Step 2

Select Administrator Settings.

Step 3

Select I/O connections.

Step 4

Select the General page under Monitor.

Figure 5-13 Configuring the general monitor settings

Step 5

Configure the settings as described in Table 5-8 on page 46.

RADVISION | Installation Guide for SCOPIA XT4000 Series Version 3.0 Initial Configuration | 45