Installation guide

Figure 5-2 Setting Country and Language
Step 2
Select the required country from the Country list using the arrow keys and press
.
The system menu and the Language field automatically change to the language used in the
selected country.
Step 3
If you want to change the language of the system menus, select the required language from
the the Language list and press
. The list of languages is displayed. Scroll to the preferred
language and press .
Step 4
Select Next to continue the basic configuration.
Adjusting the Image Position
If your monitor does not center the image correctly, perform this procedure.
Before you begin
This procedure is performed as part of the basic configuration after “Setting the System Name
and Language-related Settings” on page 30.
Procedure
Step 1
Examine the image on the monitor to decide if you need to adjust the image position.
Triangles in the top left corner and bottom right corner must be fully visible.
If the image is centered correctly, skip this procedure and select Next.
RADVISION | Installation Guide for SCOPIA XT4000 Series Version 3.0 Initial Configuration | 31