Installation guide

Connecting the Video Equipment
These sections describe how to connect the video devices to the XT Codec Unit.
•
Connecting the Main XT Standard II Camera............................................ page 19
•
Connecting the Optional XT Standard II Camera....................................... page 20
•
Connecting Cameras for Controlling the Optional XT Standard II Camera with the XT
Remote Control Unit ....................................................................... page 21
•
Using a DVD or Blu-ray Player............................................................. page 22
•
Connecting Analog Video Equipment..................................................... page 23
Connecting the Main XT Standard II Camera
Place the camera in a position to ensure eye contact between local and remote participants.
Recommended position is either directly below or directly above the monitors, in central
position, at a distance which enables capture of the entire table.
Procedure
Step 1
Remove the camera stabilizing cartons.
Caution
A failure to remove the camera stabilizing cartons before connecting the
camera can cause damage to the system.
Step 2
Connect the XT Standard II Camera to these ports on the XT Codec Unit using the camera
cable:
•
HD CAM port
•
Power and control port
RADVISION | Installation Guide for SCOPIA XT4000 Series Version 3.0 Setting up the SCOPIA XT Series | 19