Installation guide

Connecting SCOPIA XT Series
For operational information about connecting SCOPIA XT5000 Series, refer to the Quick Setup
Guide for SCOPIA XT5000 Series.
Connecting SCOPIA XT Series to Your Network
Your SCOPIA XT Series has two GLAN ports for connecting to the network. The second GLAN
port is optional and can be enabled by using the license. For more information, refer to
“Installing and Enabling Licenses which Extend System Functionality” on page 27.
You can use both ports for connecting to the private and public network, however we
recommend that you always connect the private network to the second GLAN port, whether
one router interfaces with the SCOPIA XT Series (Figure 4-1 on page 14) or multiple routers
interface with the SCOPIA XT Series (Figure 4-2 on page 15).
Figure 4-1 Connecting the XT Codec Unit to a private and a public network
with a single router in the private network
RADVISION | Installation Guide for SCOPIA XT4000 Series Version 3.0 Setting up the SCOPIA XT Series | 14