Installation guide

After reading the section “Prerequisites for Setting up the System” on page 10, you can install
the SCOPIA XT Series. These sections describe how to install the XT Codec Unit and connect it
to its peripherals:
•
Mounting of the XT Codec Unit........................................................... page 13
•
Connecting SCOPIA XT Series............................................................. page 14
•
Connecting SCOPIA XT Series to Your Network ......................................... page 14
•
Connecting the Audio Equipment ......................................................... page 15
•
Connecting the Video Equipment ......................................................... page 19
•
Connecting the Computer................................................................. page 24
•
Installing the Batteries of the XT Remote Control Unit................................ page 25
Mounting of the XT Codec Unit
Follow the guidelines in this section to correctly place the XT Codec Unit.
Procedure
Place the XT Codec Unit following these guidelines:
•
Place the XT Codec Unit on a horizontal surface which stands firmly on its base.
•
The surface must be dry and free of dust, oil and other residues.
•
Leave enough space for air circulation and for connecting cables easily.
•
Place the XT Codec Unit anywhere within 5 meter reach of the camera cables.
4
Setting up the SCOPIA XT Series
RADVISION | Installation Guide for SCOPIA XT4000 Series Version 3.0 Setting up the SCOPIA XT Series | 13