User guide
Setting PIN Codes for the XT Series
About this task
The PIN for basic settings is disabled by default. You can enable it to require users to enter the PIN
for all basic settings, such as changing the interface language. The default value for this PIN is
1234.
Before you begin
If configuring from the endpoint, you must first enable advanced configuration, as described in
Deployment Guide for Avaya Scopia
®
XT Series.
To modify the PIN from the web interface, you must be connected via HTTPS (see Deployment
Guide for Avaya Scopia
®
XT Series).
Procedure
1. Access the PIN settings. From the XT Series web interface, select Administrator Settings >
Utilities > PIN Protect Settings. From the endpoint's main menu, select Configure >
Advanced > Utilities > PIN Protect Settings.
Figure 83: Modifying the administrator PIN
2. Select Basic Settings to set or change the user's PIN code.
3. Enter the current PIN code. The default PIN is 1234.
4. Enter your new 4 digit PIN code, and re-enter if required.
5. From the web interface only, select Save.
Related Links
Configuring Advanced User Settings on page 77
Configuring Advanced User Settings
84 Avaya Scopia
®
XT Series User Guide April 2015
Comments? infodev@avaya.com