User guide

Figure 50: Starting to share content using the XT Series endpoint
Your Scopia
®
Desktop Client looks for accessible XT Series endpoints and displays a
list of endpoints you can connect to.
b. Select the XT Series endpoint that you want to use.
c. If the endpoint you want to use does not appear in the list, connect to it as described in
Step 2 on page 55.
2. Connect to the XT Series endpoint by its IP address:
a.
Turn on the XT Codec Unit by pressing the
Power key on the XT Remote Control
Unit.
The monitor displays this endpoint’s IP address.
Figure 51: IP address displayed on the XT Series monitor
b.
Right-click the Scopia
®
Desktop icon and select Screen Link > Connect to Other
Endpoint.
Presenting Content from Your Computer
April 2015 Avaya Scopia
®
XT Series User Guide 55
Comments? [e-mail]