User guide

'Getting Started' | 4
RADVISION | User Guide for SCOPIA XT1000 Version 2.0
Step 4 If all the sides of the orange frame are visible on your monitor, select Yes, otherwise select
No. Press . The first slider is highlighted in orange. Use the right and left arrow keys to
move the slider until the To p orange frame is fully visible on your monitor and press Move to
a different slider with the up and down arrow keys. Repeat the procedure for the Left, Bottom,
and Right side.
Step 5 Press Close to save the new settings.
Setting Date and Time
Procedure
Step 1
On the Main Menu page, scroll to Settings.
Step 2 Press Quick setup on the XT1000 Remote Control Unit.