Installation guide

'Hardware Setup' | 17
RADVISION | Installation Guide for SCOPIA XT1000 Version 2.0
Figure 2-12 S/PDIF to Stereo Cabling
Connecting the Video System
Connecting the Standard Camera
Use the XT1000 Remote Control Unit of the Codec Unit to control the Standard Camera.
Note: The XT1000 Standard Camera is a high-end device with state-of-the art optics and full HD (1080p)
support. Use the Sony Camera if you work with high-motion 720p60 capture.
Note: CAUTION: Remove the camera stabilizing cartons before applying power to the camera.
Connect the Standard Camera.