Installation guide

'Hardware Setup' | 16
RADVISION | Installation Guide for SCOPIA XT1000 Version 2.0
RADVISION has tested and certified the use of bi-directional AU-D9 from CYP (UK) Ltd. The same
audio converter is also called DCT-9 and is available in the RADVISION price list.
For detailed information on the audio converter, see the DCT-9 Operation Manual on the
company’s site.
As an example of analog to digital conversion: you need to connect your PC to the Codec Unit so
that the remote terminal hears the audio of the movie clip you’re just showing.
Connect your PC to DCT-9 analog L/R input. Then connect DCT-9 COAX output to the S/PDIF input
of the Codec Unit. Make sure to set DCT-9 INPUT SELECT to L/R.
Figure 2-11 Stereo to S/PDIF Cabling
As an example of digital to analog conversion: the Codec Unit sends the audio it receives to a DVD.
Connect the Codec Unit S/PDIF output to the DCT-9 coaxial input. Then connect the DCT-9 analog
L/R output to the DVD input. Make sure to set DCT-9 INPUT SELECT to COAX.