Installation guide

'Hardware Setup' | 14
RADVISION | Installation Guide for SCOPIA XT1000 Version 2.0
Connecting the Audio System
Connecting the Microphone Array Pod
The Microphone Pod performance varies with room characteristics, background noise levels, and
loudness and position of speakers.
When used in typical settings, the Microphone Pod can cover a radius of 2 meters (about 6.5 feet).
For optimal results:
• Place the Microphone Pod at the center of the table.
• In a larger conference room, connect 2 Microphone Pods. Distribute them evenly on the table.
Figure 2-8 Microphone Setup
Procedure
Step 1 Connect the Microphone Pod output to the rear panel of the XT1000 Codec Unit.
Figure 2-9 Microphone Pod
Step 2 (Optional) Connect the second Microphone Pod output to the first Microphone Pod input .