Installation guide

'Hardware Setup' | 10
RADVISION | Installation Guide for SCOPIA XT1000 Version 2.0
Note: If cascade cameras are used, RADVISION recommends connecting two cameras of the same type to
the Codec Unit: two XT1000 Standard Cameras or two Sony Cameras.
Note: RADVISION has certified the XT1000 Standard Camera and the Sony Camera for usage with SCOPIA
XT1000. RADVISION has not certified other cameras and cannot guarantee their compatibility with
the XT1000 Codec Unit. Integrators whishing to use other 3rd party cameras can do this at their own
risk. However, it is recommended to contact RADVISION customer support prior to usage to verify
any known issues.
Figure 2-3 Connecting the Codec Unit to Peripherals
Procedure
Step 1 Verify the contents of the delivery you received (see Inspecting the Product page 8).
Step 2 Plan system setup in the selected location (see Room Setup page 7).
Step 3 Connect the main camera. If required, connect a second optional camera. (See Connecting the
Video System page 17.)
Step 4 Connect the XT1000 Digital Microphone Array Pod (see Connecting the Microphone Array Pod
page 14).
Step 5 Connect the HD video cable to the HD1 monitor output.