Specifications

Procedure
1. Access the Scopia XT Desktop Server administration web interface.
2. Select Deployment in the sidebar.
3. Enter the IP address of the XT Server with its built-in MCU in the Management Address
field.
Figure 15: Setting the address of the managing Scopia XT Server for IP Office
4. For dual-NIC deployments only, select the correct NIC address from the drop-down menu for
the following fields:
Field Description
Scopia XT Desktop
Network Interface
Select the NIC address used to communicate management
messages with the Scopia XT Server for IP Office, like
configuring via the administration web interface.
Scopia XT Desktop
Control Interface
Select the NIC address used for signaling and control in your
deployment, such as call routing, establishing media channels
(codecs), starting presentations, and so on.
Scopia XT Desktop Media
Interface
Select the NIC address used to transmit the actual audio and
video media.
Figure 16: Configuring a dual-NIC Scopia XT Desktop Server
5. Select OK.
Deployment Guide for Scopia XT Desktop Server for IP Office
Version 8.2.1
Configuring Your Deployment | 25