Specifications

Chapter 4 | Configuring Your Deployment
This section describes how to access the Scopia XT Desktop Administration web interface, configure your Scopia XT
Desktop, define a local administrator account, and verify that the Scopia XT Server for IP Office and Scopia XT
Desktop are successfully connected.
Navigation
•
Accessing the Scopia XT Desktop Server Web Administration Interface on page 23
•
Defining an Administrator Account on page 24
•
Connecting Scopia XT Desktop with the XT Server on page 24
•
Verifying Scopia XT Desktop Server Installation and Connection with Other Components on page 26
•
Defining a Local Directory of Endpoints on page 27
•
Defining Bandwidth Settings in Scopia XT Desktop Server on page 28
•
Defining Scopia XT Desktop Server Public Address and Other Client Connection Settings on page 28
•
Enabling or Disabling Scopia XT Desktop Client Features on page 30
•
Rolling-Out Scopia XT Desktop Client to End Users on page 32
Accessing the Scopia XT Desktop Server Web
Administration Interface
About this task
The Scopia XT Desktop Server web administration interface is a web-based application to configure the
settings of your Scopia XT Desktop Server.
Perform this procedure to access the administration web interface.
Procedure
1. Access the Scopia XT Desktop Server Administration web interface in a browser at
http://<server_name>/scopia/admin
where <server_name> is the FQDN of your Scopia XT Desktop Server. If you have deployed
a non-standard port to access the Scopia XT Desktop Server, enter the port number in the
standard way: <server_name>:<port_number>. If you have implemented secure access to
the server, use the https:// prefix.
2. Enter your username and password.
Deployment Guide for Scopia XT Desktop Server for IP Office
Version 8.2.1
Configuring Your Deployment | 23