Instruction manual

RADVISION |SCOPIA Elite 5000 Series MCU Safety Guide Chassis-related Safety Information| 8
Installation
This unit may be intended for stationary rack mounting. Prior to mounting the unit, verify that the rack is designed
to support a unit of this kind. The SCOPIA Elite 5200 Series MCU is a 3U unit and the SCOPIA Elite 5100 Series is a
1U unit.
IMPORTANT
Before installing the Rack Mount Kit, ensure there will be adequate vertical space to install the
chassis in addition to other equipment installed.
Rack mounting information:
CAUTION
System weight may be minimized prior to mounting by removing all hot-swappable equipment.
Mount your system in a way that ensures even loading of the rack. Uneven weight distribution
can result in a hazardous condition. Secure all mounting bolts when rack mounting the
enclosure.
Ethernet and Serial Connection
WARNING
Connect the Ethernet cables only to intra-building or non-exposed wiring or cabling.
Preventing Electrostatic Discharge Damage
Electrostatic discharge (ESD) damage, which occurs when electronic cards or components are
improperly handled, can result in complete or intermittent failures. The switch processor and line
modules each consist of a printed circuit card that is fixed in a metal carrier. Electromagnetic
interference (EMI) shielding and connectors are integral components of the carrier. Handle the
carriers by the carrier edges only; never touch the cards or connector pins. Although the metal
carrier helps to protect the cards from ESD, use a preventive antistatic strap whenever you handle
the processor or line modules.