Instruction manual

RADVISION |SCOPIA Elite 5000 Series MCU Safety Guide Chassis-related Safety Information| 7
Chassis-related Safety Information
Unpacking
CAUTION
To minimize any possibility of physical damage to equipment, ensure that floor space at the
installation site is neat and uncluttered. Ensure that a mechanical lift can be maneuvered in the
area to lift the shelf from the shipping pallet.
WARNING
All poly strap-shipping bands that secure the chassis packaging are stretched tight and are under
tension. Wear eye protection to prevent possible eye injury when cutting the strap, as the strap
tension is released, and strap ends recoil outward.
Follow these recommendations while unpacking:
•
After the equipment arrives at the installation site, carefully inspect each carton for signs of shipping
damage. If the package is damaged, document the damage with photographs and contact the transport
carrier immediately.
CAUTION
Always cut any shrink wrapping material away from the packing carton; do not physically pull and
tear the fabric. Physically pulling the shrink wrapping from the shipping carton without cutting it
first may create an electrostatic charge that could damage electronic equipment.
• Remove all items from the box. If any items listed on the purchase order are missing, notify customer
service immediately.
• Inspect the product for damage. If there is damage, notify customer service immediately.
• Save the box and packing material for possible future shipment.
CAUTION
Two people are required to lift the chassis. Grasp the chassis underneath the lower edge and lift
with both hands. To prevent injury, keep your back straight and lift with your legs, not your back.
To prevent damage to the chassis and components, never attempt to lift the chassis with the
handles on the power supplies or on the interface modules. These handles were not designed to
support the weight of the chassis.