Instruction manual

RADVISION |SCOPIA Elite 5000 Series MCU Safety Guide Safety Information for SCOPIA Elite 5200 Series MCU| 15
Safety Information for SCOPIA Elite 5200 Series MCU
Servicing Media Blade
Supplied control cables are shielded.
If other source is used for management cable, shielded model should be use.
WARNING
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent
type recommended by the manufacturer. Dispose of used batteries following manufacturer’s
instructions.
CAUTION
The Media Blade contains a lithium battery. There is a danger of explosion if the battery is
incorrectly replaced or handled. Do not disassemble or recharge the battery. Do not dispose of
the battery in the fire. When the battery is replaced, the same type or an equivalent type
recommended by the manufacturer must be used. Used batteries must be disposed of according
to the manufacturer's instructions. It is recommended that the board should be returned to DTI
for battery service.
Servicing Chassis Air Filter
The SCOPIA Elite 5200 Series MCU is equipped with a user-serviceable air filter that prevents dust from being
drawn into the router. Once a month (or more often in dusty environments), examine the air filter for damage and
cleanliness.
CAUTION
A damaged air filter can restrict airflow, cause overheating in the router, and degrade EMI
performance. Be careful when cleaning or replacing the filter.
CAUTION
Be careful not to damage the honeycomb screens on the back of the air filter door and in the
fabric card cage. Damage to the honeycomb screens can restrict airflow, cause overheating, and
affect EMI performance.