Installation guide

Performing the MCU Initial Configuration | 35
RADVISION | Installation Guide for SCOPIA Elite 5100 Series MCU Version 7.7
Procedure
Step 1 Select Configuration in the MCU user interface.
The Setup tab is displayed.
Step 2 Locate the Basics section.
Step 3 Select a language in the Default user interface language list.
Figure 5-3 Basics section of the Setup tab
Step 4 Select Apply at the bottom of the Setup tab.
Setting a Text Overlay Language
Perform the procedure in this section to set the language of the text overlay messages.
The text overlay feature is set to English by default.
Procedure
Step 1 Select Configuration .
Step 2 Select Customization.
Step 3 Select the required language.
Figure 5-4 The Video display messages section of the Customize tab
Step 4
Select Apply.