Installation guide

4
Setting up the MCU | 16
RADVISION | Installation Guide for SCOPIA Elite 5100 Series MCU Version 7.7
Setting up the MCU
Mount the device onto a 19” square-hole rack. Use a shelf to support the device in the rack
(Figure 4-1 on page 16).
Figure 4-1 Shelf mounted MCU
These sections describe how to set up the device:
• Verifying Rack Suitability..................................................................... page 17
• Complying with MCU Lifting Guidelines .................................................... page 19
• Mounting the MCU onto the Rack Using a Shelf ........................................... page 19
• Attaching the System Ground................................................................ page 26
• Connecting Cables to the Device............................................................ page 26