Installation guide

Planning your MCU Deployment | 12
RADVISION | Installation Guide for SCOPIA Elite 5100 Series MCU Version 7.7
Table 2-2 Outbound Ports to Open from the SCOPIA Elite 5100 Series MCU
Table 2-3 Inbound Ports to Open to the SCOPIA Elite 5100 Series MCU
Port Range Protocol Destination Functionality Result of Blocking
Port
Required
162 SNMP (UDP) iVIEW Network
Manager, iVIEW
Management Suite, or
any SNMP manager
station
Enables sending
SNMP Trap events
Cannot send SNMP
Traps
Recommended
Port Range Protocol Destination Functionality Result of Blocking
Port
Required
21 FTP (TCP) FTP Server Enables audio stream
recording
Cannot record audio
streams
Optional
22 SSH (TCP) SSH Client Enables you to view logs Cannot view logs in
real-time (logs are
collected on the
compact flash card)
Optional
80 HTTP
(TCP)
Web client Provides access to the
MCU Administrator and
Conference Control web
user interfaces; used for
software upgrade
Cannot configure MCU Mandatory if using
HTTP
To configure, see
“Configuring the
HTTP Port on the
SCOPIA Elite MCU” on
page 45
161 SNMP
(UDP)
iVIEW Network
Manager, iVIEW
Management
Suite, or any
SNMP manager
station
Enables you to configure
and check the MCU status
Cannot configure or
check the MCU status
Recommended
443 HTTPS
(HTTP
over SSL)
Web client Provides secure access to
the MCU Administrator
and Conference Control
web user interfaces; used
for software upgrade
Cannot configure MCU Mandatory if using
HTTPS