Specifications

Troubleshooting the SCOPIA Elite MCU | 66
RADVISION | Administrator Guide for SCOPIA Elite 5100 Series MCU Version 7.7
Recovering the Password
Problem You forgot your MCU password.
Solution Reassign a username and password directly on the MCU by connecting a computer to the device’s
serial port.
Procedure
Step 1 Make sure you have these items:
• IP address of the default router the MCU uses to communicate over the network
• PC with available serial port and terminal emulator software installed
• Serial cable
Step 2 Connect the power cable.
Step 3 Start the terminal emulation application on the PC.
Step 4 Set the communication settings in the terminal emulation application on the PC as follows:
• Baud rate: 9600
• Data bits: 8
• Parity: None
• Stop bits: 1
• Flow control: None
Step 5 Turn on the power to the MCU.
A log of the auto-boot events scrolls across the computer monitor.