Specifications

Maintaining the SCOPIA Elite 5100 Series MCU | 39
RADVISION | Administrator Guide for SCOPIA Elite 5100 Series MCU Version 7.7
Configuring the TCP Port Q.931 on the SCOPIA Elite MCU
The SCOPIA Elite MCU 5000 Series has designated port 1720 for Q.931. You can configure a
different port to use Q.931 (for example, if port 1720 is busy). Q.931 is a telephony protocol used
for establishing and terminating the connections in H.323 calls.
Procedure
Step 1 Navigate to the MCU Advanced Commands section by doing the following:
a. Select the icon.
b. Select Advanced parameters.
c. Locate the H323 SIG port number in the Name column (see Figure 3-31 on page 39).
Figure 3-31 H.323 Signaling Port Configuration
Step 2 Select the icon in the Review column.
Step 3 Enter the port value in the H323 SIG port number field.
Step 4 Select Apply.
Step 5 Select Close.