Specifications

Maintaining the SCOPIA Elite 5100 Series MCU | 38
RADVISION | Administrator Guide for SCOPIA Elite 5100 Series MCU Version 7.7
Figure 3-29 RAS Port Configuration
Step 2
Select the icon in the Review column.
Step 3 Enter the port value in the H323 RAS port number field.
Step 4 Select Apply.
Step 5 Select Close.
Configuring the UDP Port for the Gatekeeper on the SCOPIA Elite MCU
The SCOPIA Elite MCU 5000 Series has designated port 1719 for gatekeeper use. You can configure
a different port to enable communication with the gatekeeper (for example, if port 1719 is busy).
Port 1719 is also used for RAS (to configure the UDP port for RAS, see “Configuring the UDP Port
for RAS on the SCOPIA Elite MCU” on page 37).
Note: If you close port 1719, you must configure another port for both the gatekeeper and RAS. If you
configure a different port for the gatekeeper, you do not need to configure a different port for RAS.
Procedure
Step 1 Navigate to the MCU H.323 Protocol section by selecting Configuration > Protocols.
Step 2 Locate the Enable H.323 protocol section (see Figure 3-30 on page 38).
Figure 3-30 H.323 Protocol section of the Protocols tab
Step 3 Enter the port value in the Gatekeeper port field.
Step 4 Select Apply.