Specifications

Maintaining the SCOPIA Elite 5100 Series MCU | 36
RADVISION | Administrator Guide for SCOPIA Elite 5100 Series MCU Version 7.7
Configuring the HTTP Port on the SCOPIA Elite MCU
The SCOPIA Elite MCU 5000 Series has designated port 80 for HTTP. You can configure a different
port to use HTTP if necessary in your environment.
Procedure
Step 1
Navigate to the MCU Advanced Commands section by doing the following:
a. Select the icon.
b. Select Advanced parameters.
c. Locate the CLI section and select More (see Figure 3-26 on page 34).
Figure 3-28 CLI Section
Step 2
Enter the webserverport command in the Command field.
Note: To see the current port value, select Execute.
Step 3 Enter the port value in the Value field.