Specifications

Maintaining the SCOPIA Elite 5100 Series MCU | 33
RADVISION | Administrator Guide for SCOPIA Elite 5100 Series MCU Version 7.7
Figure 3-25 Licensing and Registration Window
Step 5 Enter the permanent license key.
Step 6 Select Update.
Configuring Ports on All Models of the SCOPIA Elite MCU
This section provides instructions of how to configure the following ports and port ranges on the
SCOPIA Elite MCU 5000 Series, including the SCOPIA Elite 5100 Series MCU and the SCOPIA Elite
5200 Series MCU:
• Limiting the UDP Port Ranges for RTP/RTCP on the SCOPIA Elite MCU ............... page 33
• Configuring the TCP Port Range for H.245 on the SCOPIA Elite MCU.................. page 35
• Configuring the HTTP Port on the SCOPIA Elite MCU..................................... page 36
• Configuring the UDP Port for RAS on the SCOPIA Elite MCU............................. page 37
• Configuring the UDP Port for the Gatekeeper on the SCOPIA Elite MCU.............. page 38
• Configuring the TCP Port Q.931 on the SCOPIA Elite MCU............................... page 39
• Configuring the TCP/UDP/TLS Port for SIP on the SCOPIA Elite MCU.................. page 40
Limiting the UDP Port Ranges for RTP/RTCP on the SCOPIA Elite MCU
The SCOPIA Elite MCU 5000 Series has designated UDP ports 12000-13200 (for video) and
16384-16984 (for audio) for RTP/RTCP. To provide additional security for your firewall, you can
limit these ranges.
Every call uses two audio ports and six video ports. For highly utilized systems (above 90%), we
recommend multiplying the number of total ports (for all calls) by a factor of 1.5.