Specifications

Maintaining the SCOPIA Elite 5100 Series MCU | 14
RADVISION | Administrator Guide for SCOPIA Elite 5100 Series MCU Version 7.7
Securing MCU with TLS in a SIP Environment
The first step to allow a secure connection between MCU and iVIEW Management Suite is to enable
TLS support on the MCU SIP server. Once MCU SIP server is TLS enabled, a certificate must be
uploaded to the MCU to provide identification and encryption keys (see “Uploading TLS
Certificates” on page 14).
Procedure
Step 1 Log in to the MCU.
Step 2 Select Enable SIP Protocol.
Step 3 Select Specify.
Step 4 Set the IP address as the IP address of the iVIEW Management Suite server.
Step 5 Set Port to the same port defined in iVIEW Management Suite. The default value is 5061.
Step 6 Set Type as TLS.
Figure 3-1 Enabling the SIP Protocol on the MCU
Step 7
Restart the MCU.
Uploading TLS Certificates
TLS certificates, issued by a trusted Certificate Authority (CA) contains the server’s public
encryption keys, that are used over the network to ensure authentication and encryption of the
network connection.
Procedure
Step 1 Log in to the MCU.
Step 2 Select Configuration.