Installation guide

Performing Initial Configuration of the SCOPIA Elite MCU | 19
RADVISION | Installation Guide for SCOPIA Elite 5100 Series MCU Version 7.5
Step 3 Select a language in the Default user interface language list.
Figure 4-1 Basics Section of the Setup Tab
Step 4 Select Apply at the bottom of the Setup tab.
Setting a Text Overlay Language
Perform the procedure in this section to set the language of the text overlay messages.
The text overlay feature is set to English by default.
Procedure
Step 1 Select Configuration .
Step 2 Select Customization.
Step 3 Select the required language.
Figure 4-2 The Video display messages Section of the Customize Tab
Step 4
Select Apply.