Installation guide

Performing Initial Configuration of the SCOPIA Elite MCU | 16
RADVISION | Installation Guide for SCOPIA Elite 5100 Series MCU Version 7.5
Changing a User Password
Only administrators can change a password.
The SCOPIA Elite 5100 Series MCU comes with two preconfigured users: an administrator and an
operator. The password for both preconfigured users is ‘password’. We highly recommend that
you change the default user password for security.
You can change a user password at any time.
Procedure
Step 1 Access the MCU Administrator interface.
Step 2 Select Users .
Step 3 Select the Review button for the user profile you want to modify.
Step 4 Enter the new password in the Password and the Confirm Password fields.
Step 5 Select Apply.
Changing SCOPIA Elite 5100 Series MCU Service Prefix
The MCU comes with a single predefined default service (with prefix number 71). The predefined
service is factory tuned to be suitable in most cases for audio and video calls. We recommend
starting with this service and modifying it as necessary to suit your needs.
You can modify existing prefixes to suit your network dialing plan or define new services and add
them to the list.
You must ensure that the service prefix numbers are not identical to the first digits of any of your
network endpoint phone numbers or aliases.
Procedure
Step 1 Select Configuration .
Step 2 Select Conferences.
Step 3 Locate the Services list section.
Step 4 Select the Review button next to the service.
Step 5 Enter the new prefix number.
Step 6 Select Apply.