Installation guide

Setting up the SCOPIA Elite 5100 Series MCU | 9
RADVISION | Installation Guide for SCOPIA Elite 5100 Series MCU Version 7.5
Mount Kit Description
The SCOPIA Elite MCU Rack Mounting Kit contains brackets and screws as shown in Figure 3-3.
Figure 3-3 SCOPIA Elite MCU Rack Mounting
Rack Mounting the SCOPIA Elite 5100 Series MCU
After you have installed the brackets to form a shelf, you can now mount the MCU chassis. Before
mounting the chassis, read the safety guidelines described in the Safety Guide for the MCU.
To rack mount the Cisco Unified Videoconferencing 5000 Series MCU chassis, you need:
• Installed brackets in the location on the rack in which to mount the chassis, as explained in
Installing the Brackets page HIDDEN.
• A Cisco Unified Videoconferencing 5000 Series MCU chassis.
• Two people: This is not a one-person task.
Note: If you mount the chassis in holes that are not vertically aligned from side to side, you can damage
the unit.