User guide
Configuring the SCOPIA Gateway 77
Configuring SCOPIA 400 Chassis Parameters
CONFIGURING
SCOPIA 400
C
HASSIS
P
ARAMETERS
If your SCOPIA Gateway module is installed in the top slot of the SCOPIA 400
chassis, then the module also performs PCI bus functions for the chassis. In the
Gateway interface, you can use the System section to monitor chassis functions
remotely.
One of the functions the chassis performs is to monitor ambient temperature. You
can set temperature thresholds in the System section. The chassis uses these
thresholds to trigger a warning that the ambient temperature exceeds
specification and when the temperature has returned to five degrees below the
warning threshold.
Related Topics
Viewing the System Section on page 77
Setting Chassis Temperature Thresholds on page 79
Refreshing the System Section on page 79
VIEWING THE
SYSTEM SECTION
You can view the System section by selecting it in the Gateway interface.
Procedure
1 Access the Gateway interface.
2 On the sidebar, click System.
Table 3-3 lists the elements that appear in the System section.