User guide

74 SCOPIA 400/1000 Gateway User Guide
Configuring Web Settings
3 Select Remove the current certificate and click Next.
The Certificate Summary screen displays.
Note Removing a certificate disables HTTPS support and causes the
Gateway to reset.
4 Select Ye s and then Finish to remove the certificate,
–or–
Select No to cancel the operation.
RENEWING A
CERTIFICATE
Every certificate has an expiration date. You can renew it using existing
information or new information.
 Procedure
1 In the Gateway Administrator interface sidebar, click Board.
2 Click the Web tab.
3 Click Manage Certificate.
The Welcome to the Web Server Certificate Wizard screen displays.
4 To renew a certificate request using existing organization information,
follow the procedure described at step 5.
To renew a certificate request using new information, follow the
procedure described at step 6.
5 Select Using information from the existing certificate and click Next.
The Certificate Request Summary screen appears showing the existing
organization and geographical information. Go to step 7.
6 Select Using new information and click Next.
 Enter the required details in the Organization Information screen and
click Next.
 Enter the required details in the Geographical Information screen
and click Next.
 The Certificate Request Summary screen appears showing the
configured organization and geographical information. Go to step 7.
7 Click Next to generate a certificate request.