Manualshelf

User guide

ManualsBrandsRADVision ManualsComputer equipmentSCOPIA 400
71727374757677787980
70 SCOPIA 400/1000 Gateway User Guide
Configuring Web Settings
CONFIGURING WEB
SETTINGS
On the Web tab, you can set the web server port and configure enhanced web
security settings.
This section describes the following topics:
Changing the Administrator Interface Web Server Port on page 70
Enabling HTTPS on page 70
Managing Digital Certificates on page 71
CHANGING THE
ADMINISTRATOR
I
NTERFACE WEB
SERVER PORT
Port 80 is the default Administrator interface web server port. For additional
security, you can modify the web server port in the Web tab.
Procedure
1 In the Gateway interface, on the sidebar, click Board.
2 Click the Web tab.
3 In the Web server port field, enter the port number.
4 On the toolbar, click Upload.
ENABLING HTTPS This section describes how to enable or disable Gateway HTTPS support.
Note HTTPS support is enabled when a certificate is installed or a certificate is
self-signed.
Procedure
1 In the Gateway interface, on the sidebar, click Board.
2 Click the Web tab.
3 Check Support Secure Communications (HTTPS) to enable HTTPS
support. Uncheck it to disable HTTPS.
4 Click Upload.