User guide

Configuring the SCOPIA Gateway 69

Viewing Address Settings

CHANGING ADDRESS

SETTINGS

In the Addressing tab, you can change the following address information for the

Gateway—IP address information, DNS information and the Ethernet port speed

and duplex.

 Procedure

1 In the Administrator interface, on the sidebar, click Board.

2 Click the Addressing tab.

3 To change an IP address setting, do any of the following steps:

 In the IP Address field, type the IP address you want to assign to the

Gateway.

 In the Router IP field, type the IP address of the router you want the

Gateway to use.

 In the Subnet Mask field, type the subnet mask you want the

Gateway to use.

4 In the DNS Server IP field, type the IP address of the DNS server that

you want the Gateway to use.

5 In the Port settings field, choose the Ethernet port and duplex speed

value you want to set.

6 On the toolbar, click Upload.