User guide

Configuring the SCOPIA Gateway 67
Viewing General Information About the Gateway
SETTING THE
GATEWAY LOCATION
You can install the Gateway anywhere on your network including at a remote
site. On the Basics tab, you can describe the current location of the Gateway.
 Procedure
1 On the sidebar, click Board.
2 Click the Basics tab.
3 In the Location field, enter the location information about the Gateway
that you want to display.
The field displays up to 23 characters.
4 On the toolbar, click Upload to save to configuration memory.
RESETTING DEFAULT
BOARD BASIC
SETTINGS
In the Basics tab, you can restore board basic settings to factory defaults.
 Procedure
1 On the sidebar, click Board.
2 Click the Basics tab.
3 Select the Reset to default settings check box.